RT - Journal Article T1 - Three-stage inversion improvement for forest height estimation using dual-PolInSAR data JF - kntu-jgit YR - 2023 JO - kntu-jgit VO - 10 IS - 3 UR - http://jgit.kntu.ac.ir/article-1-572-en.html SP - 29 EP - 47 K1 - Dual polarimetry K1 - Forest Height K1 - Polarimetric optimization K1 - Polarimetric synthetic aperture radar interferometry K1 - Three-stage inversion algorithm AB - This paper addresses an algorithm for forest height estimation using single frequency and single baseline dual polarization radar interferometry data. The proposed method is based on a physical two layer volume over ground model and is represented by using polarimetric synthetic aperture radar interferometry (PolInSAR) technique. The presented algorithm provides the opportunity to take advantages of the dual polarimetric data, i.e, better spatial resolution and wider swath width, in comparison with the full polarimetric data, in forest height estimation application. In this research, a polarimetric optimization method is utilized to choose the optimum volume polarization basis in order to improve the results of the three-stage inversion algorithm. For the performance analysis of the proposed approach, the L-band ESAR data of the European Space Agency from BioSAR 2007 campaign (ESA) which is acquired over the Remningstorp test site in southern Sweden, is employed. The experimental result shows the dual PolInSAR HH/HV data capability in the forest height estimation without decreasing the accuracy of the result compared with the full polarimetric data. The suggested method leads to the average root mean square error (RMSE) of 4.39 m and the determination of coefficient of 0.66 in the forest height estimation in 15 predetermined stands in comparison with the LiDAR reference heights. LA eng UL http://jgit.kntu.ac.ir/article-1-572-en.html M3 10.52547/jgit.10.3.29 ER -